Custom Stepped Pure Copper Busbar and Strip

Short Description:

Item Specification
Product Custom Stepped Pure Copper Busbar / Strip
Cross-Section Single-step, double-step or multi-step; geometry to drawing
Material Options C11000, C10200, C10100, CW004A, CW008A, T2, TU1 or TU2; confirm grade and applicable standard
Other Copper Alloys C10400, C10700, C19210, C19400 or C18150 may be reviewed separately; these are not pure copper grades
Applicable Standards ASTM B187 for bus bar products; ASTM B152/B152M for sheet, strip or plate; EN, JIS or GB/T standards subject to product form and order
Overall Width Reference range: 10–300 mm
Total Thickness Reference range: 1–50 mm
Thin-Section Thickness Reference range: 0.4–35 mm
Step Height and Width To approved drawing and manufacturing review
Supply Form Cut pieces, straight lengths or coil for suitable thin sections
Reference Cut Length Cut pieces: 15–1000 mm; straight lengths: 1000–6000 mm
Temper / Condition Soft, hard or other agreed condition; designation per selected grade standard
Surface Finish Bright or mill finish; optional anti-tarnish treatment or plating subject to specification
Plating Options Silver, tin or nickel plating can be reviewed according to application and drawing
Tolerance Confirmed by drawing and manufacturability review
Inspection Dimensions, profile, flatness, material composition and other agreed inspection items
Documentation Material and inspection documents available as specified and agreed for the order

Grade names across ASTM, EN, JIS and GB/T systems should not be treated as direct equivalents without checking the material specification and certificate.


Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom stepped pure copper busbars and strips in single-step, double-step or multi-step sections. Grade, temper, dimensions, tolerance, surface finish and cut length are confirmed against the customer’s drawing and order requirements. Depending on the section and quantity, production may involve profile extrusion, rolling, drawing or machining, followed by cutting and optional plating.

Product Features

  • Single-step, double-step and multi-step cross-sections made to drawing.
  • Geometry can accommodate a height transition or half-lap joint where the assembly design requires it.
  • Material grade and temper can be selected according to electrical, thermal and forming requirements.
  • Supply can be reviewed as cut pieces, straight lengths or coils for suitable thin sections.
  • Optional silver, tin or nickel plating is available subject to specification and process review.
  • Dimensional requirements, including step geometry and flatness, are confirmed against the approved drawing.

Manufacturing Process & Quality Control

The production route is selected according to the profile, material, quantity and required condition. Not every process applies to every order.

Stage Process / Control
Drawing Review Confirm profile, material grade, dimensions, critical tolerances and intended application
Material Selection Review the specified copper grade and applicable product standard
Profile Forming Extrusion, profile rolling, drawing or another suitable forming route, subject to technical review
Secondary Machining Cutting or precision machining where needed; see fine machining services
Surface Treatment Optional anti-tarnish treatment or plating as agreed
Inspection Agreed checks may include material composition, dimensions, step profile, flatness and surface condition
Quality Records Inspection scope and documentation confirmed with the order; see Quality Assurance

Typical Applications

Potential applications depend on the final design and engineering review:

  • Switchgear and high-current busbar connections
  • EV battery packs, inverters and power-conversion assemblies
  • IGBT or SiC power-module interfaces and heat-spreading components
  • Vacuum interrupters and electrical equipment
  • Custom conductive interfaces and copper sections for industrial equipment

Frequently Asked Questions

What is a stepped copper busbar?

A stepped copper busbar has a cross-section with two or more thickness levels. The geometry can help connect components at different heights or form an overlapping joint where the assembly design requires it. The appropriate section should be confirmed from the drawing.

Can you make single-step and double-step profiles?

Yes. Single-step, double-step and multi-step profiles can be reviewed against a drawing. Step height, width, corner geometry and flatness depend on the material, forming route and dimensions, so they should be confirmed before production.

Which copper grades are available?

The supplied product information lists C11000, C10200, C10100, CW004A, CW008A, T2, TU1 and TU2. Please specify the required grade and standard. Equivalency between designations should be confirmed from the applicable material specification and certificate.

Can the profile be supplied in coils?

Coil supply may be reviewed for suitable thin sections. Heavier or more rigid profiles are generally considered as straight lengths or cut pieces. The feasible supply form depends on section dimensions, temper, coil size and handling requirements.

Which manufacturing process is used?

The route is selected for the drawing and order. It may involve profile extrusion, rolling, drawing or machining, followed by cutting and optional surface treatment. The specific process should be confirmed after engineering review rather than assumed for every profile.

Can the copper be silver-, tin- or nickel-plated?

Plating can be discussed as an option. The plating type, coverage, thickness and applicable specification should be included in the drawing or order requirements, then confirmed for the profile and intended use.

What information is needed for a quotation?

Please provide the material grade and standard, cross-section drawing, dimensions, tolerance, temper, surface finish or plating requirement, quantity, application and required inspection documents. A 2D drawing or 3D model helps the team review manufacturing feasibility.

What inspection documents can be provided?

Inspection scope and documents depend on the agreed order specification. They may include material and dimensional records, with additional checks arranged when required. Please identify required tests or certificates when submitting the drawing so they can be reviewed before quotation.

Request a Quote

Please send your drawing or 3D model, material grade and standard, quantity, tolerance, surface treatment, application and documentation requirements for review. Contact Cymber Metal to discuss the suitable material and manufacturing route.


  • Previous:
  • Next:

  • Write your message here and send it to us