C17200 Large Diameter Beryllium Copper Rod
Key Product Advantages
- High strength and hardness after controlled age hardening
- Excellent fatigue, wear and deformation resistance
- Useful electrical and thermal conductivity
- Non-magnetic with low-sparking characteristics
- Suitable for heavy-section and high-load components
- Custom cutting, turning, grinding and inspection available
Supply and Machining Capabilities
C17200 rods can be supplied in full lengths or cut into machining blanks according to the customer’s required dimensions.
Available processing includes sawing, end facing, rough turning, finish turning, center drilling and precision grinding. Required diameter tolerance, straightness and surface finish are confirmed during drawing or specification review.
Typical Applications
Aerospace components where C17200 is specified · Oil and gas drilling equipment · Heavy-duty bushings and sleeves · Precision molds and tooling · High-load wear components · Electrical contacts · Resistance-welding components · Industrial and precision machinery
Request a Quotation
Please provide:
• Alloy grade
• Required diameter and length
• Quantity
• Material condition or required hardness
• Surface finish
• Diameter and straightness tolerances
• Required mechanical properties or conductivity
• Ultrasonic testing and certification requirements
• Delivery destination
Contact Cymber Metal for C17200 large-diameter beryllium copper rods, custom-cut round bars and precision-machined blanks.
Safety Note
Machining or grinding beryllium copper may generate beryllium-containing dust or mist. Appropriate ventilation, exposure controls and personal protective equipment must be used in accordance with the applicable SDS and local regulations.
FAQ
ASTM B196/B196M is the primary material standard for C17200 rod and bar. Additional dimensional, mechanical or inspection requirements can be defined by the customer’s drawing or purchase specification.
Standard supply covers diameters from 50 mm to 300 mm and lengths from 500 mm to 3000 mm. Larger diameters and custom cut lengths are available after material and technical review.
Yes. Products can be supplied as full-length rods, saw-cut blanks, turned bars or precision-ground round bars. End facing and center drilling are also available.
Available conditions include solution-treated, cold-worked, mill-hardened and precipitation-hardened conditions. The appropriate condition depends on the required strength, hardness, conductivity and downstream machining process.
No. Tensile strength depends on the material condition, diameter, cold work, heat treatment and test location. Selected age-hardened conditions may achieve 1200 MPa or above, but any guaranteed value must be confirmed in the quotation and MTC.
Available tolerance depends on the rod diameter, length, surface condition, straightness requirement and manufacturing route. Tight tolerances require specification or drawing review before quotation.
Yes. Ultrasonic testing can be arranged for suitable large-diameter sections. The test method, reference standard, examination surface and acceptance criteria must be agreed before production.
Yes. Material Test Certificates, heat-treatment records, dimensional inspection reports and other agreed documents can be supplied according to the order requirements.
Yes, subject to size and material availability. C17500 and C17510 offer higher electrical conductivity but lower maximum strength than C17200. They are different alloys and must be quoted according to their own standards, tempers and required properties.
